Easy Two Methods to Reset TP-Link Extender
Resetting your TP-Link Extender might sound intimidating, but it’s a straightforward process that can help you troubleshoot connectivity issues or restore default settings. In this post, we’ll guide you through two easy methods to reset TP-Link Extender, ensuring that you can enjoy a seamless internet experience. Keep reading!
Methods to Reset Extender
Well, there are two methods that most users use to reset their extender. The names of the procedures are soft reset and hard reset. You can use any one of them according to your convenience. Below we give a brief introduction of both methods so that you can make an idea which one is best for you.
Soft Reset: In this method, you need to access the login page of the extender by using the default web address. After that, you need to look for the reset option and perform the on-screen steps to complete the process.
Hard Reset: In this process, all you have to do is press the reset button physically. The reset button is usually located on the back side of the device.
Now you know about both the methods in brief. If you want to learn the steps of both methods in detail, then read the next sections.
Hard Reset
Here are the steps of hard reset that you can perform to set the device to its factory default settings:
Step 1: Locate the Reset Button
Locate the reset button on your TP-Link extender. It’s usually a small, recessed button that you can find on the side or back of the extender. You might need a paperclip or a pin to press it.
Step 2: Power on the Extender
Ensure that your TP-Link extender is powered on and connected to a power source.
Step 3: Press and Hold the Reset Button
Insert the paperclip or pin into the reset button hole and press and hold it for about 5 to 10 seconds. You’ll notice the LED lights on the extender flashing, indicating that the reset process has started.
Step 4: Release the Reset Button
After holding the reset button for the required time, release it. The extender will now restart, and its settings will be reset to default.
Thus, these are the instructions that you need to follow to reset the device by pressing the button.
Soft Reset
Step 1: Connect to the Extender
Ensure that your device (computer or Smartphone) is connected to the TP-Link extender’s network. You can usually find the network name (SSID) and password on the extender itself.
Step 2: Access the Web Interface
Open a web browser and enter the default web address of the extender (e.g., tplinkrepeater.net) in the address bar. Press Enter.
Step 3: Log In
You’ll be prompted to enter a username and password. If you haven’t changed these from the default settings, use “admin” for both the username and password.
Step 4: Navigate to Factory Defaults
Once logged in, navigate to the settings or management section. Look for an option related to “Factory Defaults” or “System Tools.”
Step 5: Reset to Factory Defaults
Click on the “Restore” or “Reset” option. You might be asked to confirm your choice. Click “Yes” to proceed. The extender will now reset to its factory settings.
That’s it in this way you can reset your TP-link extender easily via the soft reset method. Once the device is reset you need to perform the TP Link setup by taking the help of the user manual.
Conclusion
Resetting your TP-Link Extender doesn’t have to be a complicated process. Whether you choose to use the reset button or the soft reset method, both options are simple and effective.
